Thursday, July 18, 2013

Don’t Forget the Building Permit!



So you’re adding a fireplace to the house; you need a city or a county permit. You’re running a gas line out to your barbecue; you need a permit. You’re adding a bedroom onto the back of the house or turning a garage into an office.
You need a permit for these projects.

                Probably all the above seem obvious, but what about those other jobs that seem less complicated, like replacing an air conditioner or building a fence?

                After consulting with Phoenix, Scottsdale, Glendale, Tucson and Prescott, we came up with the following advice about building, mechanical, electric and plumbing projects:

                DIYers: City officials can help you more than the friendly and knowledgeable guy at the hardware store. Do-it-yourselfers are often less likely to get permits for remodeling than homeowners who hire contractors, says Mike Clack, building department chief in Scottsdale.
Yet they’re the ones who need more guidance. If you follow the rules and submit plans to city officials for a permit, they can point out where your problems are and even make preliminary inspections to ensure you’re not getting in trouble. The plan review process could uncover mistakes you might make.

                Neighbors: If you don’t get a permit, the neighbors may complain to the city about a fence they don’t like or a casita blocking views. “We often get complaints from neighbors who think a structure on your patio is too high or a fence is all wrong,” says Tom Wandrie, deputy director of plan review for the city of Phoenix.

                If you don’t have the right permit then, it can be expensive. Most cities we talked to will not penalize homeowners who come in themselves to get permits retroactively, provided that work meets code. But if a neighbor turns you in, and the city inspects your property and finds a problem, you may pay double the permit fee, according to Kenneth Van Karsen, plans examiner in Tucson. Of course, you can also pay to tear down what you did – like removing the walls and drywall from around that carport that you turned into a garage.

                Responsibility: The homeowner, not the contractor,has ultimate responsibbility for the permit. If you ask your contractor, he or she can get the permits needed and help with the inspections. But the contractor may charge extra. Generally speaking, the charge and the process could be well worth the money.

                Resale: When you sell your house, you may have to do costly repairs if you lacked the right permits.Without permits, you could jeopardize any deal that’s cooking once your buyer finds out the work isn’t up to code. City officials say Realtors are savvy about this and can sometimes sniff out what you did wrong at your house. On the other hand, if you’re a buyer, find out before closing what work was done without a permit. Ask about that extra room built out back or the gas line installed for the range. Be sure to have a home inspection done. This can save trouble down the road.

                Danger: Even the little things can be dangerous; that’s why a replacement water heater or air conditioner needs a permit. Getting permits for these projects – replacing a water heater or air conditioner – often upsets homeowners the most. But after all, both jobs involve connections to gas and electric lines and sometimes repairs go wrong.  It doesn’t happen often but it’s actually possible for a water heater to explode into a flying torpedo -- like one in Phoenix in 2008 that blew the roof off a house and landed on a nearby street.

                Many times replacing a water heater or AC is done on an emergency basis – on a weekend, when the planning department is closed. You can, however, get the permit later in that case.

                Licensing: Don’t give in to your inner cheapskate; hiring an unlicensed contractor may lead to repairs or remodels that violate code. Arizona does have a “handyman” exemption so an unlicensed person can do work that doesn’t require a permit and doesn’t amount to more than $1,000 in materials and labor costs. This might be a small painting job or a door repair. But when modifying electrical or plumbing systems, contractors must have a license and a permit.

                Paperwork: All the cities we talked to have extensive Web sites that outline rules and regulations for permits. You can often apply online for permits. Some cities, like Glendale, hold seminars for homeowners who are planning projects. Glendale also has videos on its Web site that can help.

                Cost: You’ll find loads of information online about permit prices; but every city is different. The cost is probably a big reason why homeowners avoid getting permits. Some view it as a tax and not a service that helps enforce safe construction practices. Sometimes they’re worried that by notifying government about home improvements, they’ll end up paying higher property taxes. Regardless, it can save you future heartaches and headaches.

General Rules:
               
                Here are general rules about permits in Arizona; but check the rules for your own area carefully. This list does not take in all the possible jobs you might need permits for.

                Permits are needed for: Swimming pools, home additions, patio covers, carport enclosures, garage conversions, fences, retaining walls and large storage sheds. You also need a permit to install rebuild, alter, repair or replace electrical wiring, plumbing or gas systems, water heaters and furnaces or AC systems.

                Permits are not needed for: Patio slabs, sidewalks and driveways; landscape irrigation repairs; installing low-voltage landscape lighting; repairing or replacing glass, doors, hardware, kitchen cabinets, carpet, flooring or trim; painting the outside of a house; replacing a toilet; and re-shingling or re-tiling a roof when using the same material.
                Next week: We’ll talk about all the latest in new solar power options – their positives and downsides. The sun is blazing overhead; can you put it to better use?

For more do-it-yourself tips, go to rosieonthehouse.com. An Arizona home building and remodeling industry expert for 25 years, Rosie Romero is the host of the syndicated Saturday morning Rosie on the House radio program heard locally in Phoenix on KTAR-FM (92.3) from 8-11 a.m. Consult our Web site for other listings. Call 888-767-4348.

Friday, June 28, 2013

Ants: Get rid of them!

We are always amazed at the topics that generate a significant response from our listeners; in this case ants!

Suggestions from listeners:


Complete compiled list of recommendations from the hosts, listeners and Rosie on the House exterminations partners.
  • Small Apple slices (kills the queen ant due to digestive problems)
  • Corn meal (may harm bird digestion, use with caution)
  • Grits (safe for bird digestion)
  • Cinnamon (deterrent only)
  • Avon Skin So Soft in a spray bottle, diluted with water
Read more...

For answers to this and all of your landscape, garden and Home Improvement questions, visit our website: Rosieonthehouse.com

Friday, June 21, 2013

Water Treatment Softening Myths

Arizona has hard water; that’s a given. But once you accept that fact, you have to decide what to do about the water at your house.

Here are the basics: The U.S. Department of Interior defines water as being slightly hard when it has from 1 to 3.5 grains per gallon of calcium and magnesium bicarbonates occurring naturally in the water. In Arizona, hardness levels can exceed 20 grains per gallon, but these levels are not dangerous. After all, about 80 percent of the water in the United States is considered hard.

What homeowners don’t like is that these minerals can cause scale to build up inside plumbing and appliances. The useful life of a dishwasher and a water heater can be shortened as a result. The harder the water, the grayer the “whites” look when you do laundry.

Some of us don’t like the taste of the water either. You can just use carbon filtration to improve the taste. But a reverse osmosis system or distillation unit can do even more to clarify your water by combining carbon filtration with removal of dissolved solids or what some people call “floaties.”

When it comes to the hardness of the water, however, we recommend buying or renting a water softening system to handle the issue. That’s the only way to end or minimize scale on shower walls as well as mineral build-up in appliances and your water-heater. In the process, you can eliminate dry skin problems and cut back on use of soaps, detergents, shampoos, and fabric softeners

If you’re doing your homework before you buy or rent, you’re likely to hear many myths about what water treatment does and doesn’t do, according to David Perry, executive director of the Arizona Water Quality Association, a non-profit trade organization. Here are some of the claims you may hear and why you should discount them:

Myth No. 1: You can soften water with a salt-free system. That is just not possible. Systems that say they are no-salt softeners are actually just scale inhibitors. Some can decrease the scale inside appliances; but some will hardly affect that scale at all. These alternative treatment firms may use magnetic, catalytic, electric or electro-dialysis equipment. Most of these firms offer no independent confirmation that they can remove calcium or magnesium ions from water or reduce scale formation. Often these systems are coupled with a carbon filter to make drinking water taste better. But the best way to reduce hardness in water is by installing an ion-exchange softener. It will remove hardness – the scale-forming calcium and magnesium – by replacing it with sodium chloride or potassium chloride.

Myth No. 2: By removing dissolved solids from water you will deprive your body of healthy nutrients like calcium and magnesium, prevalent in hard water. The problem with that argument is that the calcium and magnesium in your water are in an inorganic form that your body cannot digest in the way that it can with minerals found in your food or in dietary supplements.

Read more...

For answers to all YOUR Landscape, Garden and Home Improvement questions, visit our website Rosieonthehouse.com

Thursday, June 6, 2013

Windows: What terms you need to know before you shop

Cladding:  This is the vinyl or metal material that covers the outside of the wood frame.  They’re designed to be easy to maintain and never require painting, although some manufacturers make paintable versions. Rosie recommends that Arizona residents avoid vinyl because they can deteriorate faster than metal under the hot desert sun.
  • Clad windows have wood frames on the interior side and either vinyl or aluminum cladding over the wood on the exterior. You can paint the inside any color you like, but you never have to paint the outside. Rosie’s ideal window: aluminum-clad wood.

Glazing: This isn’t the glaze or paint that you put on the window; it’s the number of panes of glass the window has. You have three choices:
  •  Single-glazed. This is one pane of glass, and it’s the most energy-inefficient choice. Especially in a severe hot or cold climate, a single pane of glass will do little to keep the weather outside and the air-conditioned or heated air inside.
  •  Double-glazed. The smartest buy for Arizona homeowners, double-glazed windows have two panes of glass with a small air space in between. The air acts as an insulator to keep hot outdoor air from getting indoors and cool air-conditioned air from escaping to the outdoors. Some window manufacturers fill that air space with Argon gas, which serves as an even more efficient insulator.
  • Triple-glazed. These super-efficient windows have three panes of glass (or two glass panes and a plastic one inside) with two air spaces in between. They’re great at keeping the noise out, but they’re expensive. In fact, the payback in energy savings can take more than 10 years.  
Read more

For answer to all YOUR Landscape, Garden and Home Improvement questions, visit our website, Rosieonthehouse.com

Thursday, May 16, 2013

How to use less electricity this summer

Summer is almost here, and you’re probably already dreading your hot-weather electric bills. So you have resolved to live at 80 degrees 24 hours a day to keep AC use down. You’re planning to grill dinner outside every night so the range doesn’t heat up the house. And you’re switching as many light bulbs as you can to energy-saving CFLs and LEDs.

But one more important change can take some pain out of your utility prices, an alternative that people often do not consider when they move to Arizona and sign up for electric service. What’s the secret? Choose what is called a “usage” or “time-of-day” or “time-of-use” pricing plan.

How many homes have these plans? According to SRP (Salt River Project), which has about 882,000 residential electric customers, of which almost 242,000, or about 27 percent of households, have enrolled in these plans. APS (Arizona Public Service), on the other hand, has about 1.02 million residential customers, of which about 528,000, or more than 51 percent, are in these plans. So plenty of residents out there could make the change and probably save money.

Why doesn’t everyone enroll? We don’t want to speculate too much, but many may be unaware of the plans or confused about them even though utilities try to educate customers about their options. Some may be just too busy to think about doing the research.
 
Read more...

For answers to all of YOUR Landscape, Garden and Home Improvement questions, visit our website, Rosieonthehouse.com

Wednesday, May 8, 2013

Gophers: How to get rid of them!

How do we get rid of Gophers?

We have many recommendations, including some very interesting suggestions from listeners.

We recommend:
  • Gopher Traps
  • Gas Cartridges
  • Gopher Poisoned Pellets
  • The Pickle Jar Solution: Fill up a one gallon Pickle Jar with water (click here to purchase Gallon Pickle Jars), then put a filled Pickle Jar in the middle of the garden.  Then place filled Pickle Jars in your garden, about every 12 feet. When gophers burrow, the jars vibrate and make the gophers think they are coming to a river bed and they will go somewhere else! 
Read more...

Thursday, April 18, 2013

What can I do to help my air conditioner work more efficiently?

  1. Maintain it. Have an air conditioning technician come to your home every spring before it gets too hot and check your system out. The earlier you catch a problem and repair it, the smaller than problem will remain.
  2. Add insulation to your attic or crawlspace so hot air doesn’t get in the house. The warmer the home’s air, the harder the air conditioner has to work. The harder it works, the quicker it will wear out.
  3. Make sure your unit is the right size. Bigger isn’t necessarily better when it comes to a/c. A room air conditioner that’s too big for the room it’s supposed to cool won’t operate as efficiently as a smaller one that’s the right size.
  4. Install a whole-house fan. It will keep your home cool without using the air conditioner on days when the sun’s not too hot or overnight when the outside air is cooler than the inside air.
  5. Install ceiling fans, or if you have them already, turn them on. Ceiling fans move the air so you’ll feel cooler, which will let you raise your thermostat a few degrees without noticing any difference in your comfort.
Read more...

For more information and for answers to all YOUR Landscape, Garden and Home Improvement questions, visit our website, Rosieonthehouse.com

 
Internet Strategies by I-ology®