Showing posts with label insulation. Show all posts
Showing posts with label insulation. Show all posts

Thursday, July 18, 2013

Don’t Forget the Building Permit!



So you’re adding a fireplace to the house; you need a city or a county permit. You’re running a gas line out to your barbecue; you need a permit. You’re adding a bedroom onto the back of the house or turning a garage into an office.
You need a permit for these projects.

                Probably all the above seem obvious, but what about those other jobs that seem less complicated, like replacing an air conditioner or building a fence?

                After consulting with Phoenix, Scottsdale, Glendale, Tucson and Prescott, we came up with the following advice about building, mechanical, electric and plumbing projects:

                DIYers: City officials can help you more than the friendly and knowledgeable guy at the hardware store. Do-it-yourselfers are often less likely to get permits for remodeling than homeowners who hire contractors, says Mike Clack, building department chief in Scottsdale.
Yet they’re the ones who need more guidance. If you follow the rules and submit plans to city officials for a permit, they can point out where your problems are and even make preliminary inspections to ensure you’re not getting in trouble. The plan review process could uncover mistakes you might make.

                Neighbors: If you don’t get a permit, the neighbors may complain to the city about a fence they don’t like or a casita blocking views. “We often get complaints from neighbors who think a structure on your patio is too high or a fence is all wrong,” says Tom Wandrie, deputy director of plan review for the city of Phoenix.

                If you don’t have the right permit then, it can be expensive. Most cities we talked to will not penalize homeowners who come in themselves to get permits retroactively, provided that work meets code. But if a neighbor turns you in, and the city inspects your property and finds a problem, you may pay double the permit fee, according to Kenneth Van Karsen, plans examiner in Tucson. Of course, you can also pay to tear down what you did – like removing the walls and drywall from around that carport that you turned into a garage.

                Responsibility: The homeowner, not the contractor,has ultimate responsibbility for the permit. If you ask your contractor, he or she can get the permits needed and help with the inspections. But the contractor may charge extra. Generally speaking, the charge and the process could be well worth the money.

                Resale: When you sell your house, you may have to do costly repairs if you lacked the right permits.Without permits, you could jeopardize any deal that’s cooking once your buyer finds out the work isn’t up to code. City officials say Realtors are savvy about this and can sometimes sniff out what you did wrong at your house. On the other hand, if you’re a buyer, find out before closing what work was done without a permit. Ask about that extra room built out back or the gas line installed for the range. Be sure to have a home inspection done. This can save trouble down the road.

                Danger: Even the little things can be dangerous; that’s why a replacement water heater or air conditioner needs a permit. Getting permits for these projects – replacing a water heater or air conditioner – often upsets homeowners the most. But after all, both jobs involve connections to gas and electric lines and sometimes repairs go wrong.  It doesn’t happen often but it’s actually possible for a water heater to explode into a flying torpedo -- like one in Phoenix in 2008 that blew the roof off a house and landed on a nearby street.

                Many times replacing a water heater or AC is done on an emergency basis – on a weekend, when the planning department is closed. You can, however, get the permit later in that case.

                Licensing: Don’t give in to your inner cheapskate; hiring an unlicensed contractor may lead to repairs or remodels that violate code. Arizona does have a “handyman” exemption so an unlicensed person can do work that doesn’t require a permit and doesn’t amount to more than $1,000 in materials and labor costs. This might be a small painting job or a door repair. But when modifying electrical or plumbing systems, contractors must have a license and a permit.

                Paperwork: All the cities we talked to have extensive Web sites that outline rules and regulations for permits. You can often apply online for permits. Some cities, like Glendale, hold seminars for homeowners who are planning projects. Glendale also has videos on its Web site that can help.

                Cost: You’ll find loads of information online about permit prices; but every city is different. The cost is probably a big reason why homeowners avoid getting permits. Some view it as a tax and not a service that helps enforce safe construction practices. Sometimes they’re worried that by notifying government about home improvements, they’ll end up paying higher property taxes. Regardless, it can save you future heartaches and headaches.

General Rules:
               
                Here are general rules about permits in Arizona; but check the rules for your own area carefully. This list does not take in all the possible jobs you might need permits for.

                Permits are needed for: Swimming pools, home additions, patio covers, carport enclosures, garage conversions, fences, retaining walls and large storage sheds. You also need a permit to install rebuild, alter, repair or replace electrical wiring, plumbing or gas systems, water heaters and furnaces or AC systems.

                Permits are not needed for: Patio slabs, sidewalks and driveways; landscape irrigation repairs; installing low-voltage landscape lighting; repairing or replacing glass, doors, hardware, kitchen cabinets, carpet, flooring or trim; painting the outside of a house; replacing a toilet; and re-shingling or re-tiling a roof when using the same material.
                Next week: We’ll talk about all the latest in new solar power options – their positives and downsides. The sun is blazing overhead; can you put it to better use?

For more do-it-yourself tips, go to rosieonthehouse.com. An Arizona home building and remodeling industry expert for 25 years, Rosie Romero is the host of the syndicated Saturday morning Rosie on the House radio program heard locally in Phoenix on KTAR-FM (92.3) from 8-11 a.m. Consult our Web site for other listings. Call 888-767-4348.

Thursday, April 18, 2013

What can I do to help my air conditioner work more efficiently?

  1. Maintain it. Have an air conditioning technician come to your home every spring before it gets too hot and check your system out. The earlier you catch a problem and repair it, the smaller than problem will remain.
  2. Add insulation to your attic or crawlspace so hot air doesn’t get in the house. The warmer the home’s air, the harder the air conditioner has to work. The harder it works, the quicker it will wear out.
  3. Make sure your unit is the right size. Bigger isn’t necessarily better when it comes to a/c. A room air conditioner that’s too big for the room it’s supposed to cool won’t operate as efficiently as a smaller one that’s the right size.
  4. Install a whole-house fan. It will keep your home cool without using the air conditioner on days when the sun’s not too hot or overnight when the outside air is cooler than the inside air.
  5. Install ceiling fans, or if you have them already, turn them on. Ceiling fans move the air so you’ll feel cooler, which will let you raise your thermostat a few degrees without noticing any difference in your comfort.
Read more...

For more information and for answers to all YOUR Landscape, Garden and Home Improvement questions, visit our website, Rosieonthehouse.com

Friday, May 18, 2012

What is an R-value?

R-value is a measure of how effectively insulation, windows or another building material resists heat flow. Generally, the higher the R-value, the greater the product's insulating power.

You'll run into R-value when you buy windows or insulating products for your attic.

Windows
When you are blasting cool air in the summer, your windows might be letting a lot of it escape to the outdoors.

Most U.S. homes still have single-pane windows that let the sun's hot rays in during the summertime, making air conditioners work overtime. They have an R -value as low at R-1.

Rosie recommends a double-pane window with a high-performance coating, which can have an R-value of up to R-5. Choose a window with a low-emissivity (low-E) or spectrally selective coating, will prevent the heat from penetrating the glass in the summertime.

R-value is a measure of how much heat can get through the window in an hour. Windows with a high R-value allow less heat to enter your home. The greater the R-value, the greater your energy savings will be.


Read more...


For answers to all your Landscape, Garden and Home Improvement questions, visit our website, rosieonthehouse.com
 
Internet Strategies by I-ology®